These drivers are designed exclusively for Eluktronics MECH-15 G3 Series with Intel i7-10875H CPU's and NVIDIA 3000 Series GPU's. NOTE: If your system is missing any drivers please install these drivers before downloading a driver from the direct website, ie: Download our Nvidia Driver before downloading the latest version directly from Nvidia. Please contact support if you have any questions.

01 - Audio

02 - Card Reader

03 - Chipset

04 - Control Center (*Update - 11/26/2021)

05 - Dragon Networking Suite

06 - Intel Bluetooth

07 - Intel VGA

08 - Intel Wlan

09 - IRST

10 - LAN *(Update - 04/04/2022)

11 - ME

12 - Nvidia Driver

13 - Serial IO

14 - THX APO

       https://www.microsoft.com/store/productId/9NC521C2JHDK

These drivers are designed exclusively for Eluktronics MAX Series with Intel i7-11800H CPU's and NVIDIA 3000 Series GPU's. NOTE: If your system is missing any drivers please install these drivers before downloading a driver from the direct website, ie: Download our Nvidia Driver before downloading the latest version directly from Nvidia. Please contact support if you have any questions.

01 - Audio

02 - Card Reader

03 - Chipset

04 - Control Center (*Update - 11/26/2021)

05 - Dragon Networking Suite

06 - Intel Bluetooth

07 - Intel VGA

08 - Intel GNA

09 - Intel HID

10 - Intel Wlan

11 - IRST

12 - LAN *(Update - 04/04/2022)

13 - Nvidia Driver

14 - Serial IO

15 - THX APO

       https://www.microsoft.com/store/productId/9NC521C2JHDK

15 - Thunderbolt 

16 - Sound Blaster Cinema 6 

 

BIOS Update Now Available (Public Release 09/02/2021)

MECH-15 G3 BIOS with i7-10875 CPU & RTX 3070 GPU

How to perform BIOS update:

1. Unzip all of the contents of the BIOS files directly a separate folder
2. Ensure AC adapter is plugged in.
3. Open up the folder
4. Double click on 'f.nsh'
5. A command prompt will now pop up.
6. Press 'Y' to continue after prompted.
7. The system now perform the BIOS update and should reboot automatically once the BIOS update completes.  Do NOT unplug the AC adapter or press the power off during this process.

BIOS Update Now Available for i7-11800H GEN CPU UNITS

(Public Release 04/02/2022)

MECH-15 G3 i7-11800H + RTX 3070 BIOS Update

MECH-15 G3 i7-11800H + RTX 3080 BIOS Update

How to perform BIOS update:

1. Download the file specific to your model and graphics hardware (listed at the bottom of this thread). If for some reason you are uncertain of your hardware, this quite possibly may not be the update for you;) However, if you need assistance locating this information please contact support with your order information for validation. This is only designed for Eluktronics laptop models MECH-15 G3 with an Intel 11th gen i7-11800H processor.
2. Connect your power supply.
3. Temporarily suspend Bitlocker via OS (if enabled) and temporarily remove any BIOS or SSD passwords.
4. Proceed to perform the flash by unzipping the file anywhere such as your desktop and double clicking on "update".
5. Read through the terms and confirm all Windows prompts with "Yes" if you wish to proceed.
6. The system will perform the flash. After the flash is complete and the progress window has closed automatically, please manually shut down the system. The system can NOT be powered down until this has completed.
7. After powering down the system, turn it back on and wait. This will take a little longer than usual and the system may even reboot a couple times. During this time press and hold F2 until you see the BIOS Setup Menu.
8. Skip the 'load previous defaults' prompt by pressing 'ESC' once or toggling to "No".
9. You should now see your BIOS screen. Press 'F3' to load 'optimized defaults' and confirm with 'ENTER'.
10. Make important changes like 'RAID' (if applicable) to match your previous setup and then proceed to Save and Exit.