These drivers are designed exclusively for Eluktronics PROMETHEUS XVII Series with Intel i7-11800H CPU's and NVIDIA 3000 Series GPU's. NOTE: If your system is missing any drivers please install these drivers before downloading a driver from the direct website, ie: Download our Nvidia Driver before downloading the latest version directly from Nvidia. Please contact support if you have any questions.
01 - Audio
02 - Card Reader
03 - Chipset
04 - Control Center (*Update - 3/14/2023)
06 - Intel Bluetooth
07 - Intel VGA
08 - Intel GNA
09 - Intel HID
10 - Intel Wlan
11 - IRST
12 - LAN *(Update - 04/04/2022)
13 - Nvidia Driver
14 - Serial IO
15 - THX APO
https://www.microsoft.com/store/productId/9NC521C2JHDK
16 - Thunderbolt
(Public Release 04/02/2022)
PROMETHEUS XVII i7-11800H + RTX 3070 BIOS Update
PROMETHEUS XVII i7-11800H + RTX 3080 BIOS Update
How to perform BIOS update:
1. Download the file specific to your model and graphics hardware (listed at the bottom of this thread). If for some reason you are uncertain of your hardware, this quite possibly may not be the update for you;) However, if you need assistance locating this information please contact support with your order information for validation. This is only designed for Eluktronics laptop models PROMETHEUS XVII with an Intel 11th gen i7-11800H processor.
2. Connect your power supply.
3. Temporarily suspend Bitlocker via OS (if enabled) and temporarily remove any BIOS or SSD passwords.
4. Proceed to perform the flash by unzipping the file anywhere such as your desktop and double clicking on "update".
5. Read through the terms and confirm all Windows prompts with "Yes" if you wish to proceed.
6. The system will perform the flash. After the flash is complete and the progress window has closed automatically, please manually shut down the system. The system can NOT be powered down until this has completed.
7. After powering down the system, turn it back on and wait. This will take a little longer than usual and the system may even reboot a couple times. During this time press and hold F2 until you see the BIOS Setup Menu.
8. Skip the 'load previous defaults' prompt by pressing 'ESC' once or toggling to "No".
9. You should now see your BIOS screen. Press 'F3' to load 'optimized defaults' and confirm with 'ENTER'.
10. Make important changes like 'RAID' (if applicable) to match your previous setup and then proceed to Save and Exit.