These drivers are designed exclusively for Eluktronics Prometheus XVII series with an AMD 4800H, 5800H, 5900HX CPU and a 3000 Series GPU's. NOTE: If you purchased your PC with an operating system pre-installed, you do not need to download and install anything else unless there is an "*" next to something below that has been updated after your purchase date:
01 - AMD Graphics
02 - Audio
03 - Card Reader
04 - Chipset
05 - Control Center (*Update - 3/10/2023)
07 - Intel Bluetooth
08 - Intel Wlan
09 - LAN *(Update - 04/04/2022)
10 - Nvidia Graphics
11 - RAID Driver
12 - THX APO
https://www.microsoft.com/store/productId/9NC521C2JHDK
BIOS Update
How to perform BIOS update:
1. Unzip all of the contents of the BIOS files directly a separate folder
2. Ensure AC adapter is plugged in.
3. Open up the folder
4. Double click on 'f.nsh'
5. A command prompt will now pop up.
6. Press 'Y' to continue after prompted.
7. The system now perform the BIOS update and should reboot automatically once the BIOS update completes. Do NOT unplug the AC adapter or press the power off during this process.
BIOS Update
1. Format a USB flash drive using FAT32. Unzip and copy all of the contents of the BIOS files directly into the root of the USB.
2. Ensure AC adapter is plugged in.
3. Restart the system and ensure “Secure Boot” is disabled from BIOS (F2 during boot) setup menu. Save and exit.
4. As soon as the Eluktronics boot logo re-appears, tap "F7" repeatedly to access the boot options. Select the respective USB device.
5. You will now enter the EFI shell environment (looks kind of like command prompt). Depending on the amount of storage drives or partitions you have internal to your Eluktronics laptop, enter the appropriate path. Example: Type "FS0:", press enter, type "LS" to list the directory. If you find the EFI and ROM files here, continue to the next step. If not, try FS1: and continue until you find the path. (Commonly FS3 for most customers with a single drive).
6. Type “F.nsh” and press enter.
7. The system now perform the BIOS update and should reboot automatically once the BIOS update completes. Do NOT unplug the AC adapter or press the power off during this process.
8. Go into BIOS setup menu and load optimal default settings under the “Exit” tab.
9. Repeat the same exact steps above except replace all files of the USB with the EC and enjoy!